Home / Hard cases with a built-in stand / MS56T Hard EVA Protective Sleeve with Stand for 14 inch HP

MS56T Hard EVA Protective Sleeve with Stand for 14 inch HP

Name: MS56T Hard EVA Protective Sleeve with Stand for 14 inch HP
Brand: Smatree
Price: 49.99 USD
Availability: InStock

$49.99

Cut for HP

Model MS56T

14 inch

Stock and price belong to the store that fulfils the order, and both move. Returns and warranty run through the order page of the store you buy from.

Why we cut this one

We cut this one for HP. the lid folds back into a wedge — the MS56T pattern means it goes into a bag that already has a laptop in it, and it does not change the shape of that bag.

Ask anyone who has opened a bag to a cracked screen: the knock came through a corner. The hinge is the weak point in most hard cases, so ours is reinforced along the full length and the shell stays square when the lid is open. We drew the MS56T around the HP with that in mind.

Besides the HP it swallows a travel adapter, a USB-C hub and a stylus, which is usually the difference between one bag and two.

The MS - Black finish is what this listing is in 14 inch — it was measured against 14 inch HP EliteBook 840/845/1040 G11/G10/G9, EliteBook 645/640 G11, Elite X360 1040 G11/G10/G9 2-in-1.

Before you buy

Is there room for the charger of the HP?

Yes — next to the HP the pocket takes a travel adapter, a USB-C hub and a stylus. Bulky gaming bricks fit too, though the front then sits a little proud.

Does it fit in a rucksack as well?

Yes — the outer walls of the MS56T stay flat, so with the HP inside it drops into a laptop compartment or a rucksack without bulging.

What if the HP turns out to be a different revision?

Fit is the one thing we would rather you check twice. Compare the model number on the base of the HP with the list on this page, and if it is not there, send the case back through the order page of the store you bought it from.