Home / Hard cases with a built-in stand / MS91 Hard EVA Case with Stand for 16inch HP ZBook Firefly G1

MS91 Hard EVA Case with Stand for 16inch HP ZBook Firefly G11/G11A

Name: MS91 Hard EVA Case with Stand for 16inch HP ZBook Firefly G11/G11A
Brand: Smatree
Price: 55.99 USD
Availability: InStock

$55.99

Cut for HP

Model MS91

16 inch

Stock and price belong to the store that fulfils the order, and both move. Returns and warranty run through the order page of the store you buy from.

Why we cut this one

We build this hard cases with a built-in stand around HP ZBook Firefly G11/G11A. The MS91 pattern is ours. the lid folds back into a wedge, which is the whole reason we cut a separate pattern instead of selling one size for everything.

We tried the MS91 the way the HP ZBook Firefly G11 actually travels — bag on the floor of a train, bag in the boot, bag dropped on a tiled hallway. The hinge is the weak point in most hard cases, so ours is reinforced along the full length and the shell stays square when the lid is open.

Besides the HP ZBook Firefly G11 it swallows a charger, a short cable and a mouse, which is usually the difference between one bag and two.

You are looking at the plain version in 16 inch. It was measured against 16 inch HP ZBook Firefly/Power G11/G11A, for EliteBook 865/860 G10/G9, for ZBook Firefly G10/G9, White.

Before you buy

Can I run a trolley strap through the 16-inch case?

Yes. The back panel is flat and firm, so a trolley strap or a shoulder strap sits across it without folding the case or pressing on the HP ZBook Firefly G11.

Does it fit in a tote as well?

Yes — the outer walls of the MS91 stay flat, so with the HP ZBook Firefly G11 inside it drops into a laptop compartment or a tote without bulging.

Can I order a second one for another machine?

Yes, and people often do — one for the HP ZBook Firefly G11 and one for whatever lives at home. Check the second machine against its own page; patterns are not shared across makes.